What we can change
Almost everything.
Parameter & range
pH, ORP, conductivity, resistivity, TDS, salinity, humidity, temperature, flow, pressure, level — scaled to the range your process actually operates in.
Output signal
Isolated 4–20 mA, 0–10 V, RS-485 Modbus RTU, relay contacts, pulse — or several at once if the panel and the BMS both want a copy.
Supply
Loop powered two-wire, 9–36 VDC, or 230 VAC. Loop power halves your cable run where the distance is long and the glands are expensive.
Enclosure & cutout
96×96, 120×100, DIN rail widths, wall boxes, or a vehicle-mount case. Retrofits should not need new steel cut in the door.
Display & interface
Nothing at all, a 128×64 COG readout, or a 5–7 inch touch HMI with your own screen layout and your own logo on the splash.
Uplink
2G/3G/4G, Wi-Fi, Ethernet, or none. Destination URL configurable to SmartSence, your server, or AWS.
One quote, one supplier
Board, firmware and panel as one job.
You are not managing a PCB house, a firmware contractor and a panel builder separately, then refereeing the argument when something does not line up. It is one specification, one team and one number.
The route
How a custom build runs.
Enquiry
Parameter, range, output, supply and mounting. If something in the catalogue already fits, we tell you — that is cheaper for both of us.
Written specification
Electrical spec and BOM agreed before design starts.
Prototype
A working unit you can put on your own bench, against your own probes.
Production
Small and medium volume, with register map and documentation handed over.
Start a custom enquiry
Not sure if it needs
to be custom?
Send the parameter and the range anyway. Half the time something in the catalogue already does it, and we will point you at it.